Rennen Blue Label Concave RS-51 Now Available 

The Rennen Blue Label Concave RS-51 is a premium 1-piece cast wheel engineered to combine style and performance. Its 5-spoke concave design delivers a bold, aggressive look, making it the perfect upgrade for any vehicle.

With semi-custom offsets and bolt patterns, the RS-51 ensures a precise fitment, while a variety of custom color options allow you to personalize your wheel to match your vision.

✅ 1-Piece Cast Wheel
✅ Deep Concave Profile
✅ Semi-Custom Offsets & Bolt Patterns
✅ Custom Finishes Available

Unleash your vehicle’s potential with the Rennen Blue Label Concave RS-51 — where performance meets style.

Rennen Forged R10 on Rolls Royce Wraith

Inspired by the words of the company co-founder Sir Henry Royce, ‘Take the best that exists and make it better’ we have created a car that pushes the boundaries of design and engineering. With the power, style and drama to make the world stand still. Wraith, the boldest expression of Rolls-Royce yet. The striking fastback silhouette exudes elegance and power. The aerodynamic lines and wide rear track reinforce the promise of athletic prowess and dynamism, which is further accentuated by the prominent shoulders. We equipped this beautiful Rolls Royce with a set of 24” Rennen Forged R10 wheels to help acquire a luxurious stance.

Open the coach doors and step into an inviting interior that cocoons you from the outside world. Wraith is the most powerful Rolls-Royce in history. Behind the deep set Pantheon grille sits a potent 6.6 litre, twin turbo-charged V12 engine. Delivering 624 bhp with 800 Nm of torque, it powers from 0-60 mph in 4.4 seconds. Even with this formidable power, Wraith is every inch a refined Rolls-Royce with electronically controlled air suspension that creates the signature ‘magic carpet ride’. Aside from the eye-catching satin white vinyl wrap. The guys at Excell Auto Group customized this air suspension to make this Wraith to tuck the tire on these 24″ Rennen Forged R10 wheels in brushed aluminum, polished lips and exposed hardware

Rennen International takes over

New York International Auto Show

Once again the New York International Auto Show was a great success for Rennen International. As always we came on strong with a variety of vehicles.  We had a wide array of vehicles with our wheels on display. Ranging from the brand new Polaris Slingshot to a custom widebody E46 M3 and for those that prefer American muscle; a 1969 Chevy Camaro equipped with an LS3. Never ones to disappoint, we showed up with a noteworthy lineup up of ten show cars. All three days of the auto show we were swarmed with questions and comments by thousands of show goers eager to learn more about the products which we have to offer. One of the most talked about vehicles at the show was the Slingshot at our booth. Once auto show goers figured out what it was (as most people thought it was a T-REX) they were taken back by the amazing fitment that our knowledgeable sales team set him up with. The slingshot is running Rennen Forged Concave R-55 wheels 20×9 with a steplip in the front and 22×12 with a showlip in the rear. After gawking at this reverse trike most eyes went right for the brand new BMW I8 equipped with Rennen RL-51 22×9/22×10.5 forged wheels. Next to the I8 was a beautiful ’69 Camaro that had fans of old school cars with their jaws on the ground. The 19×9.5/19×12 Rennen MV11’s fit the car beautifully and with our precise measurements fit around the huge Wilwood brake kit. After the Camaro we had a 2015 Nissan GTR on an air ride suspension with 21×10.5 21×13 Rennen RL05 that was done by Status Motoring. Swinging back around we had two beautiful Porsches parked up right next to each other. A 911 turbo equipped with Rennen RM6 steplip in 20×9 20×13 also put together by Status Motoring and a 2015 GT3 on Rennen M9’s 20×9/20×12. Following the Porsches was a custom widebody M3 sporting the new Rennen Concave RL-21 in a very wide 19×11 in the front and 19×13.5 in the rear. The car was wrapped in flat black vinyl equipped with HPF stage 3 turbo along with a lot of other goodies to make this car push around 850hp. Next to this monster was a car that appeals more to more of the VIP Japanese crowd, a Q50 equipped with AccuAir e-Level to tuck the 20×10 Rennen CRL-55 with on the car stunningly. Following up this VIP Q50 was two Lamborghini Gallardo’s one with our brand new Rennen CSL-3’s in 20×9/20×10 concave and the other with Rennen RL-54 in 20×9 20×11.5. Once again our booth was the main attraction at the show for many show goers. Thanks for all those who stopped by our booth to show their support!

Rennen R55 X-Concave wheels on Mercedes SL Black Edition 

Our friends over at M&D exclusive cardesign have truly outdone themselves this time. What started off as a stock Mercedes Benz SL500, quickly turned into a black edition widebody. To fit under this widebody they equipped this vehicle with custom made Rennen Forged Wheels R55 X-Concave with steplip. 20×10 in the front & 21×13 in the rear, with textured matte black face, red coated register, gloss black steplip and black show bolts. These forged wheels are wrapped in Continental CONTISportContact 5P 255/35/20 & 325/25/20. The SL500 was painted a breathtaking diamond white pearl paint with a black roof and several black accessories. But they didn’t stop there, a custom made stainless exhaust was made with AMG 65 exhaust tips and a modified diffusor. The interior is covered Lamborghini leather in red and black diamond stitching on roof, seats and door trims. The existing shift knob was replaced with AMG 63 shift knob and the start-stop button was moved to the dashboard from the old shift knob.

The Rennen Forged wheels are the perfect fit for this SL Black Edition Widebody. The colors they chose match the car perfectly and the sizes give it a nice aggressive stance. All of our forged wheels made from 6061-T6 forged aluminum, a material that is very strong and lightweight. This allows are customers to be able to drive their cars hard and still be able to park and showoff their ride.